How to Remove Tint From a Car Window – tint applied to it and these can get pretty annoying if you’re trying to drive in the sun. Some of the most popular uses for tint on the newer cars is privacy and cosmetic, but they also make it harder to see at night. For some motorists, this can be rather troublesome since it makes it hard to see oncoming traffic, flash signs and indicators on traffic lights, and make out what’s going on around them. Here we will show you how to remove window while maintaining the privacy and safety of your vehicle.
Tint-free windows aren’t just limited to expensive cars. What if you had a car and it was almost impossible to remove the tint from your windows? Here’s a guide on how to remove tint from windows.
Table of Contents
Reasons to Remove Tint
There are three major reasons to try and get rid of the tint on your car windows, each posing their own sets of challenges.
Aesthetic Reasons
Sometimes you just don’t want tinted windows, even though they’re in pristine condition. This can be most frustrating, since the adhesive is likely at its strongest. However, heat methods work well against undamaged tint film.
Bubbling
One of the main reasons people take off their car glass tint is because, after a while, the tint starts to develop bubbles. There’s an adhesive agent that comes with the tint to help keep the glass window of the car and the film glued together. With constant washing of the vehicle and winding of the glasses, the tint starts to loosen up from the window.
Once the film doesn’t gum to the glass anymore, the air gets in between the tint and glass, then bubbles begin to form. This makes the tint unpleasant to look at. The next thing to do is have it changed. Asides the bubbles, the color of the tint can go from black or light brown to purple. The discoloration can be ugly too. This change in color is as a result of the non-metallic dyes used to color the tint becoming worn out.
Discoloration
Over time, window tint will turn a purplish shade and you’ll want to consider replacing it. As the tint’s ability to block UV rays diminishes the more it changes to purple, the issue is more than simply an aesthetic one.
This change in color is due to the breakdown of non-metallic dyes and cannot be repaired. Again, heat is an excellent way to deal with this problem.
When there’s a law against using tint
There was a time when a law was passed in many states across the country, that forbade non-government officials from using tints on their car window glass. For you to use one, you will have to get permission from the commissioner of police in your state. Those who couldn’t get this tint permit had to remove theirs or receive immediate prosecution from law enforcement agencies. This was another reason to remove the tints whether they were still good or had gone bad.
How to Remove Window Tint with Heat (3 Methods)
Heat is an excellent way to loosen intact film, although it may require some scraping to fully remove the film. Generally, you will need minimal use of a scraper for these methods.
Hairdryer or Heat Gun
This is an easy way to remove tint or car decals and works equally well with a heat gun, although it can get a little messy. You’ll want to pick a corner to start the process.
- Hold the hairdryer about two inches from the window and run it on high until the glue melts enough to pry the edge up with your fingernail.
- Angle the dryer so it hits where the film and window meet, slowly peeling as the glue softens.
- Using a clean towel, rub the adhesive away, using your hairdryer to soften it as needed.
- Once the glue’s removed, wash the car windows with cleaner.
Steam Cleaning
Perhaps the best way to remove window tint is to grab a fabric steamer. After several minutes of steaming the window, you’ll melt the glue and the tint will come right off.
One great thing about this method is the excuse to also clean your car’s upholstery. Once the tint is off, you just have a bit of glue to contend with.
Here’s an excellent video of removing vehicle window tint with the steam method:
Solar Peel
You can take advantage of a warm, sunny day to make your job easier. You’ll need two black plastic garbage bags cut to the shape of your window, a spray bottle of soapy water, tarp, and a spray bottle of ammonia.
- Spray the outside of the window with soapy water and cover with one of the bags, smoothing it out until it’s flat.
- Cover all interior surfaces near with tarp to protect them.
- Spray ammonia on the inside of the window, making sure to wear a protective mask so you won’t inhale the fumes. Cover with the second trash bag before the ammonia can dry.
- Allow the window to bake in the sunlight for at least 20 minutes before removing the bags
- Dig up a corner of the film and gently peel the tint away, spritzing with ammonia as needed to keep it moist.
- Use a non-metallic scraper to remove any leftover tint, then use one of the cleanup methods below to get rid of the residue.
Using Ammonia or Soap and Water
- Protect your car’s interior from the ammonia by taping tarps, plastic sheets, or even garbage bags to your interior doors and window frame.
- Cut black garbage bags to fit the size of the insides and outsides of your car windows. Spray soap and water on the outside of each window to help the garbage bags stick. Apply each of the garbage bags to the outside of each of the windows.
- Spray ammonia on the inside of the car windows until each window is completely covered and place the garbage bags on top. If the garbage bags will not stick to the window, use tape to help them stay up.
- Wait for 1-2 hours while the ammonia soaks in and loosens the window tint’s adhesive.
- Remove the garbage bags and use a razor to peel up the corner of the window tint. Slowly peel it off until the window tint is removed. If any parts of the window tint get stuck, use the razor to lift up the tint and continue peeling.
- If you don’t have ammonia or prefer to use soap and water, follow the same spraying and peeling method using hot water mixed with soap.
How to Take Off Window Tint (Scraping Methods)
These options all involve taking off car window tint using primarily sharp objects. While they all work well, you should take extra care to avoid scratching the glass when using any type of blade. Non-metallic scrapers work best on plastic windows.
A Note on Using Sharp Blades: We strongly urge you to use caution when removing tint film from any window with a metallic scraper.
While using a knife or razor blade might work a bit better than a plastic blade such as an ice scraper, there’s a much higher risk of damaging the glass.
In the event you need to use a sharp blade, remember to always hold it at an angle to avoid damaging the glass.
Papers
Old newspapers have a lot of uses, including window tint removal. Thoroughly wet the tint film with hot, soapy water and cover in newspaper. Let the window soak in the sun for at least an hour, adding more soapy water every 20 minutes.
You should now be able to carefully scrape away the tint using long strokes. In the event you can’t remove the film easily, simply soak for another half hour.
Peel’n’Soak
The slowest method is also the best choice for small areas or problem windows. Carefully cut an edge using a razor blade and peel the film away. Don’t worry about messy edges.
Once the film is off, spray the area with soapy water and scrape away the glue. Finish off with a good round of glass cleaner.
Removing Window Tint Glue
Finally, you’ll need to know how to remove window tint glue once the tint itself is gone. This doesn’t always happen as efficiently as one would hope. These methods all work well against any remaining gunk.
Alcohol
One of the cheapest and most effective solvents out there, a bottle of 90 percent isopropyl alcohol can make quick work of leftover glue.
Put some on a rag to get rid of smaller spots and a spray bottle and rag for larger surfaces. Be sure to use this method in a well-ventilated area and avoid breathing in the fumes as you work.
Goo Gone
This popular glue remover works great against leftover tint glue. Note that it won’t help with removing the tint itself.
Nail Polish Remover
A surprisingly useful solvent, you can use nail polish remover a microfiber cloth, and some elbow grease to remove the glue. While this method requires some additional effort, the process will buff your windows to a beautiful sheen.
Scrubbing
On a warm day or in a heated garage, you can use hot, soapy water (we suggest using Dawn) and a car ice scraper to get rid of the glue residue. Not only is this a safe method, it’s also a good excuse to clean the car’s interior.
Conclusion
There’s nothing quite like driving along at 70 miles per hour and seeing that orange haze that comes from the back of a car with tinted windows. Tinting your car windows is not for everyone and it can be very expensive. But you can remove the tint from most cars by applying the solution listed above.