How to Remove Gorilla Glue From Skin

How to Remove Gorilla Glue From Skin – We’ve all been there at some point – one minute you’re rocking your latest DIY fix-it project around the house using Gorilla Glue, and the next minute you’re in a sticky situation with glue all over your hands. Read on to learn how to remove Gorilla Glue from skin.

Gorilla Glue is one of the best adhesives available for household repairs, home improvement, and craft projects. But since it dries very quickly, it is sometimes challenging to remove if you get it in the wrong place.

Don’t worry; we have several practical solutions for this common problem. When gluing accidents happen, use everyday household cleaning products to quickly and efficiently take care of the mess.

We teach you precisely how to remove Gorilla Glue from skin using products you already have in your house. Many home remedies suit your needs, even if you have extremely sensitive skin.

Table of Contents

Is Gorilla Glue on Skin Harmful?

Over the past two or three decades, adhesives have radically improved concerning viscosity and curing time. This means that if you accidentally get gorilla glue on your skin, it will begin to harden within seconds. This is due to its fast curing time, making it difficult and often painful to remove. 

So, if it does come into contact with your skin, it is advisable to remove it immediately before it begins to cure. Another characteristic of Gorilla Glue is that once it has been applied to any surface, it penetrates deep into the pores of the material. This makes it unsafe if allowed to remain on your skin.

When dealing with this kind of adhesive, you need to take extra care, as it becomes waterproof when cured. Once it hardens, Gorilla Glue on skin can be seriously tough to take off. There is no problem removing glue from your skin if it is ordinary water-based glue. However, Gorilla Glue is a polyurethane adhesive, which is why you need to take extra care when working with it.  

1.Clean Up

Gorilla Glue dries extremely quickly, so it’s important to try to wipe up any excess before it dries. We recommend keeping paper towels or a clean rag close by while you work with any Gorilla Glue, wiping up any accidental spills immediately. Quickly cleaning up spills is the easiest and most effective way to remove the glue.


2.Wash

With the excess glue removed with a paper towel while it’s still wet, you can often pick up any residue left behind with cold, soapy water. Like the towel, you should also keep a supply of soapy water close by while you work, so it is quickly accessible if you have any accidents.

washing hands

3.Dissolve

Once the glue begins to dry, you will need something stronger than soapy water to remove the glue. Luckily, one of the best ways to remove dry Gorilla Glue is with acetone. Acetone is the main ingredient in common nail polish remover, and many households already have a bottle lying around. If you don’t have some already, it’s easy to find in almost any grocery or dollar store, and it doesn’t cost much. Just make sure you get a nail polish remover that contains acetone.

Acetone can take a few minutes to dissolve the Gorilla Glue, so you’ll need to find a way to soak the affected body part. If you can’t hold the body part in the solution, you’ll need to get a washcloth soaked with acetone to hold over the area. Depending on the amount spilled, the acetone should begin to soften and break up the Gorilla glue in just a few minutes, and you should be able to get most of it off.


4.Exfoliate

Once the acetone has dissolved and removed most of the Gorilla Glue, you may still see or feel a residue that was left behind.  The best way to remove this residue is by exfoliating the skin. You can use one of the many commercial brands available, or you can make your own using sea salt, coconut oil, and essential oil.

hand exfoliating

Exfoliating Recipe Ingredients & Instructions

Ingredients

  • 1 cup coarse sea salt
  • ½ cup of coconut oil
  • 5 -7 drop of your favorite essential oil (optional)

Instructions

  • Combine the ingredient in a glass bowl
  • Store in an airtight container
  • Use as needed

If you have dogs or cats in your household, you may want to avoid including the essential oils because many of the fragrances are harmful to those animals. Especially tea-tree oil. Use the solution as you would use soap. The coarse sea salt acts as a mild abrasive that will help remove the remaining glue from your skin.

Safety Tips for Removing Gorilla Glue from Skin

It’s imperative to comment on safety when trying to remove Gorilla Glue from your skin. Gorilla Glue is a potent adhesive, and you might damage your skin if you try to remove it too fast.tb1234

Removing Glue Safely

  • Never try to pull apart your fingers or other body parts that are stuck together. Soak the affected areas using one of the techniques listed above until they come apart on their own to help you avoid tearing your skin.
  • Avoid scrubbing your skin too rapidly or vigorously when getting Gorilla Glue off of your skin. Otherwise, friction burns or other skin damage can easily occur. Move slowly and steadily, frequently vary the direction in which you’re rubbing, and switch between rubbing with an abrasive object and your fingers to give your skin an occasional break.
  • If you’re unsure whether something will irritate your skin, briefly test it on a small area first before soaking your skin.
  • To help your skin recover after removing Gorilla Glue, use a moisturizer on the affected area to prevent or alleviate dryness and cracking.

While Gorilla Glue is the go-to adhesive for DIY projects and household fixes, things get messy fast when there are inadvertent spills. It’s important to use caution when handling fast-drying products, but gluing accidents happen.

However, even if you do get Gorilla Glue on your skin or other surfaces, it’s relatively straightforward to remove when you know what you’re doing. There are plenty of options for how to remove Gorilla Glue from skin, so choose the approach that works best for you.

The best way to get Gorilla Glue off your skin depends on what you already have at home, how sensitive your skin is, and how long it’s been in contact with your skin.

Conclusion

Acetone is usually the best way to remove Gorilla Glue from your skin as well as most surfaces, and if it works for Gorilla Glue, you know it will work for most other glues as well. Acetone is the best way to get it off your skin, and it will get your fingers unstuck as well. The heat will also work well in places where the glue can penetrate the surface, but sometimes the only thing you can do is chisel and sand away as much as you can.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x